Dipex
Polish remover
Fields of application
Dipex is a highly effective polish remover that easily and safely
dissolves tough deposits with many layers of polish.
Developed for effective removal of polish for floor renovation. Low
pH. No discolouration of flooring. Approved for linoleum floors.
Advantages
– Avoid contact with painted surfaces.
– pH approx. 10 in concentrated form.
– pH approx. 9.9 in 10% usable solution.
Application instructions
Spread the solution across small areas so that it does not dry and
allow to work for 10-15 minutes. Scrub carefully with a scrubbing
machine and coarse disc.
Use a scrubbing block for areas the machine cannot reach. Immediately
remove the solution using a water vacuum cleaner or similar.
For tough, numerous layers of polish, the removal procedure
may be repeated several times until the floor is polish free. Rinse
the floor surfaces immediately – twice with warm clean water. Immediately
remove rinsing water – use a water vacuum cleaner. The
floor should have a neutral pH value, check with a pH strip. Allow
the floor to dry carefully before primer/top and outer treatment is
begun.
Dosage
Normal dosage: 0.5-1 litre for 9 litres cold water.
For especially tough cases and for several layers: 1 litre to 4 litres
cold water. For removal of polyurethane polish: 1 litre to 2 litres
cold water.
Packaging
GP-160923 – 5L
